Download Hunter Engineering Quick Tread Specification Sheet

Quick Check Drive Thru with Quick Tread
Surface Mounted
QUICK CHECK DIMENSIONS
24 1/2 in.
67 1/4 in.
(5 ft. 7 1/4 in.)
16 1/4 in.
50 in.
45 1/4 in.
11 in.
32 in.
12 in.
23 1/2 in.
QUICK TREAD DIMENSIONS
PEDESTAL
5 in. 14 7/8 in.
67 in.
(5 ft. 7 in.)
44 in.
(3 ft. 8 in.)
34 1/2 in.
39 in.
(3 ft 3 in.)
5 in.
24 in.
(2 ft.)
17 3/8 in.
96 in. (8 ft.) is the maximum distance
between the middle of the pedestal
and nearest edge of Quick Tread.
Any further will reduce max
vehicle test entry speed.
36 to 96 in.
(3 ft. to 8 ft.)
87 in.
(7 ft. 3 in.)
3 1/2 in.
STACK HEIGHT
OPTIONAL IN-GROUND CONDUIT SPECIFICATIONS
PEDESTAL
RAMP ONE
RAMP TWO
Additional conduit
from pedestal to
console for a Burndy
cable (max length of
75 feet), and two Cat5
cables may also be
desired. Air supply to
pedestal should also be
considered.
Form 6891-T, 02-15b
Copyright © 2015, Hunter Engineering Company