Download HP Moonshot-180G Command Reference Guide

HP Moonshot Switch Module CLI Command Reference
Class of Service Commands
show interfaces cos-queue
This command displays the class-of-service queue configuration for the specified interface. The unit/slot/
port parameter is optional. If specified, the class-of-service queue configuration of the interface is displayed.
If omitted, the most recent global configuration settings are displayed.
Format
show interfaces cos-queue [unit/slot/port]
Mode
Privileged EXEC
Term
Definition
Interface Shaping Rate
WRED Decay Exponent
Queue Id
Minimum Bandwidth
The global interface shaping rate value.
The global WRED decay exponent value.
An interface supports 8 queues numbered 0 to 7.
The minimum transmission bandwidth guarantee for the queue, expressed as
a percentage. A value of 0 means bandwidth is not guaranteed and the queue
operates using best-effort. This is a configured value.
Indicates whether this queue is scheduled for transmission using a strict
priority or a weighted scheme. This is a configured value.
The queue depth management technique used for this queue (tail drop).
Scheduler Type
Queue Management Type
If you specify the interface, the command also displays the following information.
Term
Definition
Interface
The unit/slot/port of the interface. If displaying the global configuration, this
output line is replaced with a Global Config indication.
Interface Shaping Rate The maximum transmission bandwidth limit for the interface as a whole. It is
independent of any per-queue maximum bandwidth value(s) in effect for the
interface. This is a configured value.
WRED Decay Exponent The configured WRED decay exponent for a CoS queue interface.
September 2014
CLI Command Reference
Page 625