1
Download HP Moonshot-180G Command Reference Guide
Transcript
HP Moonshot Switch Module CLI Command Reference IGMP Snooping Configuration Commands set igmp mrouter interface This command configures the interface or range of interfaces as a multicast router interface. When configured as a multicast router interface, the interface is treated as a multicast router interface in all VLANs. Default disabled Format set igmp mrouter interface Mode Interface Config no set igmp mrouter interface This command disables the status of the interface as a statically configured multicast router interface. Format no set igmp mrouter interface Mode Interface Config set igmp report-suppression Use this command to suppress the IGMP reports on a given VLAN ID. In order to optimize the number of reports traversing the network with no added benefits, a Report Suppression mechanism is implemented. When more than one client responds to an MGMD query for the same Multicast Group address within the max-responsetime, only the first response is forwarded to the query and others are suppressed at the switch. Default Disabled Format set igmp report-suppression vlan-id Mode VLAN Config Parameter Description vlan-id A valid VLAN ID. Range is 1 to 4093. Example: The following shows an example of the command. (Routing) #vlan database (Routing) (Vlan)#set igmp report-suppression ? <1-4093> Enter VLAN ID. (Routing) (Vlan)#set igmp report-suppression 1 September 2014 CLI Command Reference Page 426
