1
Download HP Moonshot-180G Command Reference Guide
Transcript
HP Moonshot Switch Module CLI Command Reference
Port-Based Network Access Control Commands
no dot1x user
This command removes the user from the list of users with access to the specified port or all ports.
Format
no dot1x user user {unit/slot/port | all}
Mode
Global Config
show authentication methods
Use this command to display information about the authentication methods.
Format
show authentication methods
Mode
Privileged EXEC
Term
Definition
Authentication Login List
Method 1
Method 2
Method 3
The authentication login listname.
The first method in the specified authentication login list, if any.
The second method in the specified authentication login list, if any.
The third method in the specified authentication login list, if any.
Example: The following example displays the authentication configuration.
(Routing) #show authentication methods
Login Authentication Method Lists
--------------------------------defaultList
: local
networkList
: local
Enable Authentication Method Lists
---------------------------------enableList
: enable
none
enableNetList
: enable
deny
Line
------Console
Telnet
SSH
DOT1X
Login Method List
----------------defaultList
networkList
networkList
Enable Method List
-----------------enableList
enableList
enableNetList
:
September 2014
CLI Command Reference
Page 341
