Download Avaya BSGx4e Operation Guide

Upgrade
2 System pages
Upgrade
Figure 9
Upgrade system image
Use the Upgrade page to import new system software image files and bootloader files.
You can store two image files and define which to use for booting the system.
The manual configuration and user settings you made persist through an image
upgrade.
You acquire system update files at Nortel’s support Web site.
System > Upgrade
Perform the following steps to import a new software image:
1. Acquire the new image file and store it on the PC connected to the BSGX4e.
2. In the upper panel, select the slot in which to load the new image. Normally, this is
the slot that is not currently in use. In the lower panel, the slot to boot from is
automatically detected as the slot to which the new image was loaded.
3. Use the Browse button to navigate to the file stored in Step 1.
4. Click the Upgrade button. The importing process takes a few minutes. You are
notified when it is finished, and prompted to reboot the system.
Perform these steps to import a new bootloader file:
1. Acquire the bootloader file and store it on the PC connected to the BSGX4e.
2. Use the Browse button to navigate to the file stored in Step 1.
3. Click the Upgrade button. You are notified when it is finished.
62
NN47928-502