1
Download Edge-Core ES3526XA V2 EU
Transcript
LLDP Commands 4 Command Mode Global Configuration Command Usage The time-to-live tells the receiving LLDP agent how long to retain all information pertaining to the sending LLDP agent if it does not transmit updates in a timely manner. Example Console(config)#lldp holdtime-multiplier 10 Console(config)# lldp medFastStartCount This command specifies the amount of MED Fast Start LLDPDUs to transmit during the activation process of the LLDP-MED Fast Start mechanism. Syntax lldp medfaststartcount packets seconds - Amount of packets. (Range: 1-10 packets; Default: 4 packets) Default Setting 4 packets Command Mode Global Configuration Command Usage The MEDFastStartCount parameter is part of the timer which ensures that the LLDP-MED Fast Start mechanism is active for the port. LLDP-MED Fast Start is critical to the timely startup of LLDP, and therefore integral to the rapid availability of Emergency Call Service. Example Console(config)#lldp medfaststartcount 6 Console(config)# lldp notification-interval This command configures the allowed interval for sending SNMP notifications about LLDP MIB changes. Use the no form to restore the default setting. Syntax lldp notification-interval seconds no lldp notification-interval seconds - Specifies the periodic interval at which SNMP notifications are sent. (Range: 5 - 3600 seconds) 4-181
