Download Gable Homesheds

Transcript
FLASHINGS
Screw the front and rear corner flashings at 600mm
Ridge and Barge Cap Installation
centres with 10x16mm self drilling screws. Corner
Fix the front and rear barge capping to the roof sheets.
flashings will require notching in line with the rafter pitch.
Lap the barges at the ridge line and trim the outside
piece to a vertical edge for a neat appearance.
Refer to Figures 21 and 22 for the flashing details.
Similarly, fix the ridge capping to the roof sheets with
12x35mm self drilling screws or M6x50 timber/steel
screws at 300mm centres.
1
2
3
Ridgecap
Bargecap
5
9
7
Standard Corner
10
PA Door Flashing
PA Door Mullion
Centre Column Cover
Internal Column Cover
6
Front Corner
4
Box Gutter
8
PA Back Corner
11
Filler Column Corner
12 | 13
PA Door Lintel (Z)
14
Tophat | Sliding Door
Header Beam
15
Sliding Door
Flashing
Roller Door Header
Flashing
2
1
GABLE HOMESHED WITH ROLLER DOORS
1 - Ridgecap
Box Gutter
(Optional Boundary Gutter)
15
7
2 - Bargecap
4 - Centre Column Cover
7 - PA Back Corner
9 - PA Door Flashing
10 - PA Door Mullion
11 - PA Door Lintel (Z)
15 - Roller Door Header Flashing
4
10
9
11
Figure 21
2
1
GABLE HOMESHED WITH SLIDING DOORS
1 - Ridgecap
2 - Bargecap
6
5 - Front Corner
6 - Standard Corner
14
8 - Filler Column Corner
14 - Sliding Door Flashing
5
8
Figure 22