1
Download DPE Peripheral Setup Guide
Transcript
Section 2 – VTR/ATR Performance & Setup change but some degradation of video quality may be noticed. System Setup RS422–Communication Setup Communication is through the back panel RS-422A REMOTE IN connector. • Press SETUP ––> [F10]INTERFACE ––> [F1]MODE 1 • Press HOME ––> [F11]CONTROL ––> REMOTE Jam Sync Time Code All selections are made in the TC/CHR menu: • [F1] Source: INT • [F2] TC Slave: AUTO • [F4] Run Mode: REC RUN • [F7] VITC: ON/OFF (user discretion) System Timing System Phase VIDEO OUT ––> [F3]SYS PHASE adjusts the sync phase of the component output. Other adjustments are available for both the component output and the composite output. 2-61
