Download 4 - Pdfstream.manualsonline.com

BAD BOY™ SPOT LUMINAIRE USER MANUAL
Removing the Enclosure Covers
To access interior enclosure components, one or both of the Upper Enclosure Covers may need to be
removed.
Parts:
21.9812.0820
21.9812.0830
1 EA ASSY, INTAKE COVER, UPPER ENCLOSURE
1 EA ASSY, EXHAUST COVER, UPPER ENCLOSURE
Tools and Supplies:
#2 Philips screwdriver
To remove Upper Enclosure Covers:
Step
1. At Upper Enclosure Cover, loosen two captive screws.
Step
2. Remove cover by pulling straight out until lip clears yoke support.
CAUTION: The Upper Enclosure Covers are not identical. One is for the Intake side and one for the
Exhaust side. Be sure to re-install covers in the proper location.
Exhaust Cover
Intake Cover
PRG Sticker
Mesh Screen
Captive Screw (2)
Figure 4-3: Removing Upper Enclosure Covers
62
02.9812.0001C