Download HMX Manager Installer/User Guide
Transcript
42 Avocent® HMX Manager Installer/User Guide 8. Select the Target Groups tab and click New. 9. From the Transmitters drop-down list, select the transmitter that you want the user station group to follow and click Add. The selected transmitter will move to the top row of the configuration table. NOTE: The selected transmitter must be set to Share Mode to work in Regular Follow Mode. See Share Mode on page 33. NOTE: Although the HMX Manager will allow you to add multiple transmitters to the Target Group configuration table, the user station group will only follow the device listed in the first row of the table in Regular Follow Mode. 10. Click Save. View Only Mode View only mode allows the administrator to limit a user’s capabilities to only viewing transmitter video sessions. The user will no longer be able to use a keyboard, mouse or USB port on the server with the attached transmitter. The user can only establish a video connection to a transmitter displayed on the OSD and view it. The list of transmitters displayed on the OSD is determined by the user's access rights. To enable view only mode: 1. Click the Users tab. 2. Select a user and check the box for view only mode. 3. Click Save. Multi-video Follow Mode To create a user station group and designate targets for Multi-video Follow Mode: 1. Click the Units tab. 2. Select Follow Mode from the side navigation bar. 3. Select the UserStation Groups tab and click New. 4. In the Receivers drop-down list, select the user station that you wish to be the leader and click Add. The user station will move to the top of the configuration table. 5. In the Receivers drop-down list, select a user station that will be a follower in the group and click Add. 6. Repeat step 5 for each user station that will be part of the group. NOTE: You can make any user station within the configuration table the leader by moving it to the top of the table using the arrow button at the bottom of the screen. 7. Click the Multi-video Mode checkbox. 8. Click Save. 9. Select the Target Groups tab and click New. 10. From the Transmitters drop-down list, select the transmitter that you want the lead user station to follow and click Add. 11. From the Transmitters drop-down list, select the transmitter that you want the user station listed on the second row of the UserStation Groups configuration table to follow.