Download PDF

Appendix
Technical
Data
A.2 Technical Data
This section provides technical data of the SpycerBox Cell.
When installing the R&S DVS system in a rack, take care that warmed
up air is conducted to the rear of the rack and properly vented away.
The technical data may vary depending on the system and its equipment.
A.2.1 General Technical Data
The general technical data of the SpycerBox Cell are as follows:
Measured with SpycerBox Cell ([email protected] GHz, 16 GB RAM (Cap),
30 × Seagate ST9600204SS, 1 × Atto FC Celerity FC-162E).
Chassis weight
Approx. 22 kg
Chassis weight with Approx. 28 kg
drives
Environment (also
during transport)
No exposure to heat
No exposure to strong electric or magnetic
fields
No vibrations/shocks allowed
Operating
temperature
Maximum:
Optimum:
10 - 30 °C (50 - 86 °F)
15 - 25 °C (59 - 77 °F)
Storage temperature 0 - 50 °C (32 - 122 °F)
Humidity
10% to 80% RH @ 30°C, non-condensing
Non-operating humidity
Up to 85% RH @ 30°C, non-condensing
Air
Dust-free
Power consumption 573 W max. input power
526 W typ. input power
478 W idle power
Input power require- 100 - 240 V @ 47 - 63 Hz
ments
SpycerBox Cell | Hardware Guide | Version 1.0.2
Rohde & Schwarz DVS GmbH
A-5