Download Lucent (TNT-SL-S50) Expansion Module

Transcript
Installing a MAX TNT or DSLTNT Chassis
Installing a MAX TNT or DSLTNT exhaust shield
To install a MAX TNT or DSLTNT unit in a rack, proceed as follows:
1
Using a mechanical lift (recommended) or a minimum of two installers, raise the unit to
the proper height for installation.
2
Insert the unit in the rack and secure it as shown in Figure 3-3. If you need more
information, refer to the instructions that came with your rack.
Figure 3-3. Mounting the MAX TNT or DSLTNT in a rack
Installing a MAX TNT or DSLTNT exhaust shield
You can install an exhaust shield on a rack-mounted MAX TNT or DSLTNT. The exhaust
shield redirects hot air from MAX TNT or DSLTNT units so that it is not being blown into
adjacent units. Figure 3-4 illustrates how to install the exhaust shield in a rack.
To order the shield from your Lucent reseller, ask for product code TNT-SP-SHIELD.
3-6
MAX TNT/DSLTNT Hardware Installation Gulide