1
Download TransAct Ithaca 91PLUS Receipt Only Matrix Printer
Transcript
Programmer's Guide PcOS Series 90PLUS Change History Change History Rev. M Updated bookmarks in the Code Summary Table Added Section 3.6.2.2 and Table 4 Updated MICR section Added Euro Character on page 33 Corrected Cash Drawer Command on page 72 Updated “Service Information” section Updated “Contacting Ithaca Peripherals” section Rev. L Clarified cash drawer connectors on page 144 Changed IEEE-1284 to IEEE 1284 and Code 3 of 9 to Code 39 Rev. K Reformatted entire document Corrected miscellaneous grammar and spelling mistakes Rev. J Update for Firmware Rev. 2.24 Corrected Epson documentation Added documentation for justified bar codes and readable printing of bar codes Added documentation for Bar code 93 Rev. I Update for Firmware Rev. 2.21 Corrected documentation for ENQ 15, 17, and 20 commands; length was 40H changed to 40 decimal Added [ESC] z (&%FR) from release commands Added features to graphic-save Added OCR overlay features Corrected miscellaneous grammar and spelling mistakes Rev. H Update for Firmware Rev. 2.15 Improved description of pass-through and multidrop Added features to [ESC]a command Added 90PLUS Removed references to Ithaca Peripherals Corrected description of Mechanical Test Mode Updated several graphic examples Rev. G Update for Firmware Rev. 2.13 Added narrow, 2.4 inch print zone Added [ESC]mP, [ESC]q<n>, and [ENQ]<17> commands Changed documentation on [ENQ] commands to reflect that they are no longer buffered Documented Epson cash drawer option Fixed right margin specifications Rev. F Update for Firmware Rev. 2.11 Added functionality to the RESET commands Enabled [DLE][ENQ] <3> EPOS Added M50 extension commands Added 270° rotated font and 5 x 7 fonts to [ESC]P commands Changed IPCL command &%CC to accept 3 decimal digits, was 2 decimal digits Corrected the description of the [ESC]J command. It does not start the next line at the left margin unless Auto-CR is on. Updated the configuration table Changed RS1284 references to IEEE-1284 Added Welsh and Thai character sets Updated the cut command. The cutter does not have selectable cut. The cut command is now only 2 bytes. Updated MICR section to include translation tables and field checking Added 5 x 7 font to rotated print functions Added sections on Windows Plug and Play Added [ENQ]<20> (return all status) and [ENQ]<21> (return printer ID) commands 12/16/99 Rev M Page i
