Download Lucent Technologies Release 6 Security Camera User Manual

DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets 555-230-112
5
Install and Wire Telephones and Other Equipment
Add DS1 Tie and OPS
Issue 5
May 1998
Page 5-90
Save Translations
1. If the system is high or critical reliability, enter status system 1 and press
Enter to verify that the system is in the “active/standby” mode.
2. Enter save translation. Press Enter. This instructs the system to take all
translation information in memory and write it to the translation card or
tape.
3. If the system contains a TN750/B Announcement circuit pack, enter
display announcements and press Enter. If administered recorded
announcements are listed, enter list configuration software-version
press Enter. Check Page 2 of this form to see when the announcements
were last saved. To save the current announcements, enter save
announcements and press Enter.
Shut Down DEFINITY LAN Gateway System
! WARNING:
Neglecting to shut down a DEFINITY LAN Gateway assembly before powering down
the system cabinet where it resides can damage the LAN Gateway disk.
! CAUTION:
Save the system parameters if you plan to reuse the current system.
1. Log onto the DEFINITY LAN Gateway.
2. When the main menu appears, select Maintenance.
3. Select Reset System from the Maintenance menu.
4. Select Shutdown from the Reset System menu.
Shut Down DEFINITY AUDIX System
! WARNING:
Neglecting to shut down an AUDIX assembly before powering down the system
cabinet where it resides can damage the AUDIX disk.
1. If a DEFINITY AUDIX resides in the system to be upgraded, shut down the
AUDIX assembly and allow the disk to completely spin down.