1
Download DK Digital AS-200 Technical data
Transcript
Manual VIPA System 200V Once Chapter 9 SM 238C - Combination module No main counting direction • The counter counts once starting with the load value. • You may count forward and backwards. • The count limits are set to the maximum count range. • At over- or underrun at the count limits, the counter jumps to the according other count limit and counts from there on. The gate is automatically closed. • To restart the count process, you must create a positive edge of the gate. • At interrupting gate control, the count process continuous with the last recent counter value. • At aborting gate control, the counter starts with the load value. Lower count limit Upper count limit Counter value Load value Valid value range - 2 147 483 648 (-231) + 2 147 483 647 (231-1) - 2 147 483 648 (-231) to + 2 147 483 647 (231-1) 31 31 - 2 147 483 647 (-2 +1) to + 2 147 483 646 (2 -2) Interrupting gate control: counter value upper counter limit overflow load value 0 lower counter limit underflow time gate start gate stop gate start automatically gate stop automatically Aborting gate control: counter value upper counter limit overflow load value 0 lower counter limit underflow gate start HB97E - SM - Rev. 09/19 gate stop gate start automatically gate stop automatically time 9-27
