Download vSync 924 User guide

vSync412i User Guide
© vSync DVR December 2007
3. Getting Started – Setting Up the DVR
The following sections detail the initial setup of the vSync DVR.
3-1. Setup – Main Screen
Pressing the Setup button prompts a user for entry of a password. The default password is “1111”.
Input the default password by pressing the Up button 4 times, followed by the SELECT button.
(We recommend that you protect your DVR system by assigning a new password. Refer to section
3.6 for instructions.) After assigning a new password, enter it by using the direction arrow keys
(representing 1, 2, 3, & 4) or using the keypad, and then press the SEL button for entering into the Setup
menu shown in Figure 3.1.1. Navigate through the menu icons using the directional buttons and press the
SELECT button to enter into sub-category menus.
Figure 3.1.1. Set-up Main Menu Screen
Rev A.
December 2007 13
Specifications and content are subject to change without notice.