Download Sharp VL-Z3S Specifications

Basic Operations
Camera Recording
Easy Camera
Recording on Tape in
Full Auto Mode
4
Press the Start/Stop button to begin
recording.
REC
Available mode:
Tape Camera
• Before you start recording, perform the
operations described on pages 6 through
20 to prepare your camcorder for
recording.
Basic Operations
Media Selection switch
Power switch
Note:
• Before recording an important scene,
please perform the recording test, then
playback to check if the scene was
recorded properly. If noise occurs, use a
commercially available cleaning tape to
clean the video heads (see page viii).
Maximum continuous recording and
actual recording times in Tape
Camera mode
Start/Stop button
1
2
Remove the lens cap.
3
Hold down the Lock button and set
the Power switch to v.
Set the Media Selection
switch to V.
• The picture from the lens now
displays and the POWER/CHARGE
(RED) indicator lights up green.
• The camcorder is now ready to
record (Recording Standby mode).
POWER/CHARGE
(RED) indicator
Max. continuous
recording time
Battery
pack
BT-L226
LCD
closed
LCD
open
LCD
closed
LCD
open
120
105
60
55
Note:
• Using the zoom (see page 23) and other
functions or turning the power on and off
frequently will increase power consumption. This may result in a decrease in the
actual recording time compared to the
maximum continuous recording time listed
above.
AU TO
Lock button
Note:
• If “AUTO” is not displayed at this time,
set the
camcorder
to Full Auto mode
Downloaded
From
VideoCamera-Manual.com
(see page 57).
22
Actual
recording time
Manuals