Download Zebra Z6Mplus User guide
Transcript
Operations Load Media in Peel-Off Mode or Liner Take-Up Mode 9. Remove the exposed labels so that only the liner remains. 10. Feed the liner over the tear-off/peel-off bar (1) and behind the peel assembly (2). Make sure that the end of the liner falls outside of the printer. 1 2 11. Push the media to the back of the transmissive sensor (1). Slide in the media guide (2) until it just touches the edge of the media. 1 2 1/18/06 Z4Mplus/Z6Mplus User Guide 13163L-001 Rev. A 37