Download Zebra Z6Mplus User guide

Transcript
Operations
Load Media in Peel-Off Mode or Liner Take-Up Mode
9. Remove the exposed labels so that only the liner remains.
10. Feed the liner over the tear-off/peel-off bar (1) and behind the peel assembly (2). Make
sure that the end of the liner falls outside of the printer.
1
2
11. Push the media to the back of the transmissive sensor (1). Slide in the media guide (2)
until it just touches the edge of the media.
1
2
1/18/06
Z4Mplus/Z6Mplus User Guide
13163L-001 Rev. A
37