Download Zebra Z6Mplus User guide

Index
printer settings
backfeed, 91
baud, 85
control prefix, 88
data bits, 86
date, 94
delimiter character, 89
format convert, 93
format prefix, 89
host handshake, 86
idle display, 94
IP settings, 96
label top, 92
language, 95
LCD, 93
left position, 92
maximum label length, 78
media type, 75
network configuration label as baseline, 72
network ID, 87
parallel communications, 85
parity, 86
print darkness, 73
print method, 76
print server settings, 96
print width, 77
protocol, 87
saving, 69
serial communications, 85
setting through control panel, 68
time, 94
ZPL mode, 90
printhead
cleaning, 103
head close setting, 91
pressure adjustment, 63
printing specifications, 144
product markings, 143
protocol setting, 87
R
radiation exposure limits, iv
recycling the printer, 15
reflective sensor
adjustments, 61
sensor selection, 76
registration problems, 121
relative humidity requirements, 16
remove used ribbon, 56
replacing fuse, 112
1/18/06
report shipping damage, 15
reset network option, 100
restore
factory default settings, 69
network settings, 69
Rewind mode
adjust media alignment, 52
cleaning rewind option, 106
liner removal, 50
loading media, 44
selecting, 75
RFID
“smart” labels, 24
ribbon
adhesive test, 26
determining coated side, 25
loading, 53
ordering, 3
removing, 56
ribbon LED setting, 93
scratch test, 26
specifications, 147
when to use, 25
RIBBON IN message, 116
RIBBON OUT message, 115
Ribbon S. setting, 93
ribbon sensor
calibration procedure, 84
roll media
described, 23
routine cleaning schedule, 102
RS-232 serial interface, 20
connections, 138
RTC (Real-time clock) setting
date, 94
idle display, 94
time, 94
S
sales, 3
scratch test
media type, 25
ribbon coated side, 26
self tests, 125
CANCEL, 126
communications diagnostics, 132
FEED, 128
FEED and PAUSE, 132
PAUSE, 127
Power-On Self Test (POST), 125
Z4Mplus/Z6Mplus User Guide
13163L-001 Rev. A
155