Download Printronix P4280 Setup guide

Transcript
Table A–1. Nominal Print Rates
Print
Dimensions
Performance
Dot
Density
(DPI)
Characters
per
Inch
Dot
Matrix
NOTE 1
(CPI)
NOTE 2
OCR
90 (180) X 144
Uppercase
Only
Descenders
& Underline
Plot
Mode
NOTE 3
LPM*
LPM*
IPM**
10
9 (17) X 14 + 2
110
96
22
10
12
12.9
15
16.4
7 (13) X 9 + 3
6 (11) X 9 + 3
6 (11) X 9 + 3
5 (9) X 9 + 3
5 (9) X 9 + 3
320
245
33
10
12
13.3
15
17.1
5 (9) X 7 + 2
4 (7) X 7 + 2
4 (7) X 7 + 2
3 (5) X 7 + 2
3 (5) X 7 + 2
600
480
66
High Speed Draft A
(HS)
60 (120) X 48
10
12
13.3
15
17.1
5 (9) X 5 + 1
4 (7) X 5 + 1
4 (7) X 5 + 1
3 (5) X 5 + 1
3 (5) X 5 + 1
800
685
100
High Speed Draft B
(HSB)
60 (120) X 72
10
12
13.3
15
17.1
5 (9) X 6 + 1
4 (7) X 6 + 1
4 (7) X 6 + 1
3 (5) X 6 + 1
3 (5) X 6 + 1
685
600
66
High Speed Draft C
(HSC)
60 (120) X 72
10
12
13.3
15
17.1
5 (9) X 6 + 2
4 (7) X 6 + 2
4 (7) X 6 + 2
3 (5) X 6 + 2
3 (5) X 6 + 2
685
533
66
Near Letter Quality
90 (180) X 96
Data
Processing
60 (120) X 72
NOTE 1
A (B) X C, where:
A is maximum horizontal dot density.
B is horizontal placement resolution.
C is vertical dot density.
NOTE 2
D (E) X F + G, where:
D is maximum number of dots that may be placed on
E horizontal dot positions.
F is number of vertical dots for uppercase symbols.
G is number of dots available for descenders.
NOTE 3
The Plot Mode graphics described here are provided for IGP or Code V
emulations. Plot speeds are obtained if the dot count per row does not exceed
85% of the maximum dots allowed for that mode, and the steps per dot row do
not exceed the vertical density of that mode.
* LPM = Lines Per Minute
** IPM = Inches Per Minute
Printer Specifications
A–7