1
Download Siemens CU230P-2 Technical data
Transcript
M 1 n ! <1> M_max upper scal p1528 [C] (1524[0]) M_max up/mot scal -2000.0 ... 2000.0 [%] p1524 [D] (100.0) © Siemens AG 2011 All Rights Reserved SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 01/2011 Lower torque limit 3 <1> <2> 4 ! ! <2> [6640.1] M_max lower scal p1529 [C] (1525[0]) M_max lower scal -2000.0 ... 2000.0 [%] p1525 [D] (100.0) Danger: Negative values at <1> positive values at <2> 1 Vector control Upper/lower torque limit M_max low w/o offs [Nm] r1527 M_max lower p1523 [C] (1521[0]) M_max lower -20000000.00 ... 1000000.00 [Nm] p1521 [D] (0.00) M n [6640.1] 2 represent a minimum torque for the other torque direction and can cause the motor to accelerate uncontrollably. 3 4 5 6 FP_6630_97_51.vsd 13.12.2010 V4.4 7 Function diagram G120 CU230P-2 8 - 6630 - Function diagrams 6630 – Upper/lower torque limit M_max upper -1000000.00 ... 20000000.00 [Nm] p1520 [D] (0.00) 2 M_max up w/o offs [Nm] r1526 M_max upper p1522 [C] (1520[0]) Vector control Fig. 2-81 2-590 Upper torque limit
