Download AMX AXWire Specifications
Transcript
Configuration The Audio tab (FIG. 29) enables you to adjust its audio in and out settings. FIG. 29 Device Setup - Audio tab The following options appear on the Audio tab: Audio Tab Options Auxiliary In - Attenuation Use the slider to preset the attenuation of the audio for the auxiliary in device. You can set the attenuation between the range of +24dB to -100dB. Balance Out - Volume Use the slider to preset the volume of the audio for the balance out device. You can set the volume between the range of +24dB to -100dB. Amplifier Out - Volume Use the slider to preset the volume of the audio for the amplifier out device. You can set the volume between the range of +24dB to -100dB. Amplifier Out - Equalizer Use the sliders to set the equalizer settings for the amplifier out device. You can set the levels for the 100Hz, 250Hz, 500Hz, 1KHz, 2.5 KHz, 5KHz, and 10KHz frequencies. You can set each level between the range of +20dB to -20dB. Center All Press this button to reset all Amplifier Out settings to 0dB. The Display tab (FIG. 30) enables you to select a display output and establish input display settings. FIG. 30 Device Setup - Display tab 16 Enova AVX-400 Cat5 Presentation Switcher Operation/Reference Guide