Download Technical Documentation Project : CopperJet History

© 2000 Allied Data Technologies
Example:
r1483 interface stats
See also:
9.5
pvc
Syntax:
pvc [<channel>|none] [port]
Description:
This command sets or displays the PVC used for communications. When setting the PVC, the
configuration must be saved and the system restarted before the change takes effect. The
argument may be none to indicate no PVC configured, or a value in the range 1.maxVCI.
maxVCI is typically 1023 but is fixed by system configuration.
On BUN (Broadband Unified Network) based systems it is also possible to set, or display, the
port with which the PVC is associated. Configuration saving saves this information. By
default, there is no PVC.
Example:
r1483 pvc 12
See also:
9.6
status
Syntax:
status
Description:
This command displays the status of the RFC1483 process. At present, the status consists of
whether the process is active, that is has a valid PVC, or is inactive, that is has no PVC.
Example:
r1483 status
See also:
15-08-00
This document is not officialy released and has to be treated as confidential.
page 40 of 98