Download Siemens Simatic PC Panel PC 870 Technical data
Transcript
Installing and Connecting the Panel PC 670/870 11/01 Installation cut-out When selecting the installation cut-out, ensure that the switching cabinet/panel contains reinforcement bars to stabilize the plate. If necessary, install such reinforcement bars. An installation cut-out is required corresponding to the following diagram: 2 to 6 2 H+1 B+1 T+1 Unit depth T Installation cut-out B H PC 670 PC 870 Panel PC 670/870, 12", Keys Panel PC 670/870, 15", Keys 450 450 295 ± 0,5 326 ± 0,5 114 142 202 227 Panel PC 670/870, 12", Touch Panel PC 670/870, 15", Touch 368 450 290 290 – 137 – 229 Figure 1–3 Unit depth T All figures in mm. Installation Cut-out for Standard Installation Specifications without the CD-ROM option. Note Ensure sufficient air volume for heat transportation within the switching cabinet/panel. There must be at least 100 mm free space around the Panel PC 670/870. 10 mm are permissible on the rear side. Also ensure sufficient free space to pull out the Panel PC 670/870 from the installation cut-out. 1–4 SIMATIC Panel PC 670/870 Commissioning Instructions A5E00135748-01