Download RAD Data comm TDMoIP Gateway IPmux-16 Specifications

IPmux-4 Installation and Operation Manual
Chapter 2 Installation
The ambient operating temperature of IPmux-4 is 0o to 50o C (32o F to 122o F), at a
relative humidity of up to 90%, non-condensing.
2.3 Package Contents
The IPmux-4 package contains the following items:
•
IPmux-4 unit
•
Power cord
•
CBL-RJ-45/DB-9/NULL cross-cable that connects the IPmux-4 control port and
an ASCII terminal (DTE) for local management.
•
RM-11 kit containing hardware for mounting IPmux-4 in a 19-in rack
(optionally supplied)).
Power Cable
IPmux-4 comes equipped with the power cord connected to PS1 on the Rear
Panel. If the unit is equipped with a redundant power supply, IPmux-4 is
equipped with an additional power cord.
2.4 Equipment Needed
•
Hand Tools and Kits
IPmux-4 needs no special tools for installation. A screwdriver is necessary
when mounting IPmux-4 in a 19-in rack.
•
Control Cable
IPmux-4 is provided with one null cable:.
The null cable (CBL-RJ-45/DB-9/NULL) is used to connect IPmux-4 (DTE) to a
terminal (DTE). Terminals are usually equipped with a male connector DB-9
or DB-25; therefore the null cable should have a female connector.
A straight cable can be defined to connect IPmux-4 (DTE) to a modem (DCE).
2-2 Equipment Needed
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com