Download Dcm TP260 User guide

Working Environment
11 Working Environment
Features of the working environment are outlined in Table 10.
Table 10. P5040 DS (SuperHYDRA) Working Environment
Mode
Inside PC Box
Standalone
Components
Optional Expansion
• ATX12V
• 250 GB hard disk
• DVD R/W drive
• Plug SGMII riser card into PEX slots 1, 2, 3, 5, or 6.
• Plug XAUI riser card into PEX slots 1 or 2.
• ATX12V
• Plug SGMII riser card into PEX slots 1, 2, 3, 5, or 6.
• Plug XAUI riser card into PEX slots 1 or 2.
NOTE!
ATX12V powers the P3041/P5020 DS via J41 and J43.
12 HW Getting Started Procedures
Table 11 outlines standalone activation of the P5040 DS (SuperHYDRA).
Additional HW options—not contained in the P5040 DS (SuperHYDRA) kit—include adding an
SD/EMMC card, Aurora and PROMJet devices, and a 1588 riser card.
CAUTION!
The board is marked with several “Caution Hot” locations (R153, R173, R181, and R191); they are a consideration when the
chip is in ‘Asleep’ mode and/or no processor is found on the board.
"Caution Hot”
P5040 DS Hardware Getting Started, Rev. 1.5
Freescale Semiconductor
37