1
Download Agilent Technologies PSG Programming instructions
Transcript
Command Reference Power Subsystem ([:SOURce]) :POWer:ALC:SOURce Supported All [:SOURce]:POWer:ALC:SOURce INTernal|DIODe|MMHead [:SOURce]:POWer:ALC:SOURce? This command enables you to select the ALC leveling source. *RST INT Choices INTernal Key Entry Internal Remarks N/A DIODe MMHead Ext Detector Source Module :POWer:ALC:SOURce:EXTernal:COUPling Supported All [:SOURce]:POWer:ALC:SOURce:EXTernal:COUPling <value>DB [:SOURce]:POWer:ALC:SOURce:EXTernal:COUPling? This command sets the external detector coupling factor. *RST +1.60000000E+001 Range −200 to 200 Key Entry Ext Detector Coupling Factor Remarks Use this command when DIODe is the selected ALC leveling source. Refer to “:POWer:ALC:SOURce” for the source selection. Chapter 4 281
