Download Eircom 8010R User guide

LU Eircom 8010R_D66.book Page 27 Vendredi, 28. novembre 2008 10:05 10
SECURITY
Modifying the base code
Authorising listening in
The base code (0000 being the default
setting) is required to access certain security
functions. It must be composed of 4 digits.
The intrusion function authorises or prevents
a second handset registered on the same
base from joining in a current conversation. If
the intrusion mode is active, it is then
possible to join a conversation in progress
using another handset.
On the navigator key
, press or until the SECURITY screen is displayed,
press OK to confirm.
Select CHANGE CODE using or . Press
Valid.
.
On the navigator key
, press or until the SECURITY screen is displayed,
press OK to confirm.
Enter the old base code using the keypad
Select INTRUSION using or . Press
(default is 0000). Press Valid.
Valid.
.
Enter the new base code using the keypad.
Press Valid.
.
Confirm by entering the new base code
again. Press Valid.
.
A screen displays the current status (on
or off).
•
To change the status, press Edit
•
To keep the status, press Valid.
.
.
To exit the menu, press the red key
.
.
To exit the menu, press the red key
.
Carefully note down the base code
number. You will need this code to
change certain settings.
27