1
Download Minolta EP6000 Specifications
Transcript
<Double Feed Control> • Even if the Paper Take-Up Roll takes up two sheets of paper at one time, the double feed control uses the second sheet of paper for the next copy cycle without causing a paper misfeed. It eliminates a paper misfeed that would otherwise result when two sheets of paper are taken up at once. • If the second sheet of paper is stationary blocking the Paper Take-Up Sensor (PC6/7/8) when the trailing edge of the first sheet of paper moves past the Vertical Transport Sensor (PC10/11/12), the copier determines that it is a double feed condition and provides double feed control. • If, however, the second sheet of paper has reached the Vertical Transport Roller, the double feed control is not provided since the paper is fed further into the copier by the Vertical Transport Roller. This could result in a paper misfeed or the second sheet of paper being fed through the copier with the first one. • If double feed control is provided, it results in the paper take-up interval timing becoming longer. That means longer intervals between two successive paper take-up motions, resulting in a decreased cpm (productivity). Feeding from 1st Drawer Vertical Transport Rollers Transport Rollers Double Feed Control Not Provided Provided Vertical Transport Sensor 1 Detection Point 1st Drawer Paper Take-Up Sensor Detection Point 235 msec. 1st/2nd/3rd Drawer Paper ON Take-Up Clutch (CL1/2/3) OFF 1st/2nd/3rd Drawer Paper Take-Up Sensor (PC6/7/8) H Vertical Transport Sensor (1/2/3 PC10/11/12) H L L 1075T117CA M-125
