Download Qlogic MPX200 User guide

Transcript
0
Online DGC RAID-0, 50:06:01:62:41:e0:49:2e
1
Online HP HSV210-1, 50:00:1f:e1:50:0a:37:19
Please select a Array/Target from the list above ('q' to quit): 1
Index (VpGroup Name)
----- -------------1
VPGROUP_1
Please select a VpGroup from the list above ('q' to quit): 1
Do you want to execute command on 1)All LUNs 2)Single LUN: ('q' to quit): 2
Index (LUN/VpGroup)
----- ------------0
0/VPGROUP_1
1
1/VPGROUP_1
2
2/VPGROUP_1
3
3/VPGROUP_1
4
4/VPGROUP_1
5
5/VPGROUP_1
Please select a LUN from above ('q' to quit): 1
Index (Operation)
----- -----------1
Execute custom command
2
Execute default command set
3
Execute one command from default command set
Please select an Operation from above ('q' to quit): 3
Index (Command)
----- --------1
REPORT LUNS
2
STANDARD INQUIRY
3
SUPPORTED VPD PAGE
4
UNIT SERIAL NUMBER VPD PAGE
5
DEVICE IDENTIFICATION VPD PAGE
6
BLOCK LIMITS VPD PAGE
7
THIN PROVISIONING VPD PAGE
8
READ CAPACITY 10
9
READ CAPACITY 16
10
GET LBA STATUS
11
REPORT TARGET PORT GROUP
12
TEST UNIT READY
13
READ
14
REPORT SUPPORTED OP CODES
nl
nl
nl
Please select a command from above ('q' to quit): 2
Do you want to save output in file? [1) Yes 2) No]: 2
Do you want to display output on CLI? [1) Yes 2) No]: 1
USER INPUTS
================================================
TARGET WWPN :- 00:00:02:00:01:00:00:00
================================================
================================================
PATH 0 :- 50:00:1f:e1:50:0a:37:19
================================================
COMMAND :- STANDARD INQUIRY (0x12)
LUN ID :- 0001000000000000
STATUS :- 0
SCSI STATUS :- 0
CDB :- 12000000ff0000000000000000000000
DATA TRANSFER LENGTH :- 32768
RESIDUE TRANSFER LENGTH :- 32516
ACTUAL DATA LENGTH :- 252
DATA :00 00 05 12 f7 30 00 32 48 50 20 20 20 20 20 20
48 53 56 32 31 30 20 20 20 20 20 20 20 20 20 20
35 30 30 30 42 35 41 37 41 54 4c 38 34 42 41 32
39 39 41 53 5a 30 32 34 00 00 00 62 0d 80 13 20
08 c0 03 00 03 24 01 60 01 c0 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
91 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 50 00 1f e1 50 0a 37 10 50 00 1f e1 50 0a
37 19 20 30 00 00 00 00 00 00 35 30 30 30 31 46
45 31 35 30 30 41 33 37 31 30 35 30 30 30 31 46
45 31 35 30 30 41 33 37 31 39 36 30 30 35 30 38
42 34 30 30 30 35 34 44 39 34 30 30 30 31 33 30
30 42 46 45 35 41 30 30 30 30 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00
END OF COMMAND
================================================
PATH 1 :- 50:00:1f:e1:50:0a:37:1d
================================================
COMMAND :- STANDARD INQUIRY (0x12)
nl
nl
Commands
85