Download Encore Series Software Users Guide

8
5530/5520 DataNode Setup
Template Setup tabs - All tabs except Template are the same as that of its associated DataNode tabs. From the Template
setup tab shown below, you can set the name and description of the template. This tab also contains a list of all of the
DataNodes of the same type as the template. Each DataNode in the list has a checkbox that indicates if the template is
associated with the respective DataNode. When you associate a template with a DataNode, all of the setup values from
the template are copied to the DataNode's setup values. Thereafter, any change that you make to the template is copied to
all of the DataNodes associated with the template.
check box to
associate template
with DataNode
DataNode Setup tabs - All setup parameters except for those on the Identification and Status, Communication, and Polling
tabs are part of the template. The setup values on these tabs (e.g. DataNode name, IP address, polling rate, etc.) are not
affected by the changes to Templates.
8-2
Encore Series Software User’s Guide