Download Encore Series Software Users Guide

61000 PQ DataNode Setup
The next parameters specify the cross trigger
send/receive settings. The users determine which event
types the analyzer will broadcast a cross trigger for,
which type of cross trigger it will respond to, and what
information it will record. For a 61000 PQ DataNode, the
cross trigger ID is divided into two groups: one for rms
events and another for transient events.
Under RMS EVENT MESSAGE CONFIGURATION,
the range of values that can be entered is between 0 to 15.
Send this message when a RMS event is detected
enables the sending of rms cross trigger. The default ID
value for rms cross trigger is 8. Record a RMS event
when this message is received enables the DataNode to
respond to received rms cross trigger. The default ID
value for receiveing rms cross trigger is also 8.
Encore Series Software User’s Guide
Under TRANSIENT EVENT MESSAGE
CONFIGURATION, the range of values that can be
entered is also between 0 to 15. Send this message when
a Transient event is detected enables the sending of a
transient cross trigger. The default ID value for rms cross
trigger is 0. Record a Transient event when this
message is received enables the DataNode to respond to
received transient cross trigger. The default ID value for
receiveing transient cross trigger is also 0.
13
13-21