Download Encore Series Software Users Guide

5560 QOS DataNode Setup
10
Smart Views
Smart Views are similar to Reports of the same name. While Reports are used to summarize data, Smart Views are typically used to zoom in on data, fix data properties, and add/change channels for data trending (see page 10-10).
Smart Trend
Smart Trend displays timeline types of graph of a large range of parameters, based on the type of DataNode and which
parameters were saved for trending. After using the standard query to select the DataNodes and time/date range, a display of all possible parameters that can be trended is shown. Clicking a green check mark will trend that parameter for
the selected phase and will also show a histogram of the different values with a cumulative probability line. Red X marks
indicate that the particular parameter is not available for trending. In the sample screens below, a 5560 DataNode is
selected for display under the standard query selection. Clicking on the Display or Display in New Window will show
the list of parameters available for trending as the bottom screen shows.
Smart Trends Query Screen
Click the green check mark to
trend the parameter for the
selected DataNode. See page
10-10. (Screen capture shows
only a partial list of parameters)
Trend Parameters for 5560 DataNode
Encore Series Software User’s Guide
10-9