Download Seagate ST3390N Installation guide

10-18
Installing, cabling, and configuring peripheral devices
Installing and configuring the HP Thinkjet printer
Installing and configuring the HP Thinkjet printer
Installing the HP
Thinkjet printer
To install the HP Thinkjet printer, follow these steps.
Step Action
Standard 1.0
1
Place the printer near the administration terminal.
2
Connect the power cord to the printer.
3
Connect one end of the appropriate cable to the back of the
printer. See “HP Thinkjet printer connections to administration
terminals” on page 10-19.
4
Connect the other end of the cable, using an adapter if needed,
to the administration terminal. See “HP Thinkjet printer
connections to administration terminals” on page 10-19 for
details of the required cables and adapters.
5
Set the printer switches as shown in “HP Thinkjet printer mode
switch settings” on page 10-20 and “Printer RS-232 switch
settings” on page 10-20. “HP Thinkjet printer switch locations”
on page 10-20 shows the location of the switches.
6
Plug the printer power cord into an AC receptacle.
7
Power on the printer.
Modular Option EC Installation and Maintenance Guide
November 1999