Download Seagate ST3390N Installation guide

Terminal configuration
A-19
Configuring an HP700/22 terminal
Configuring an HP700/22 terminal
Configuring an
HP700/22 terminal
To configure an HP700/22 terminal, follow these steps.
Step Action
1
Power on the terminal.
2
Enter setup mode by pressing the SETUP key located on the
top row of function keys. If no key is marked SETUP, press the
third key from the left on the top row.
The General setup screen is displayed with the current setup
values.
Note: There may be minor differences between what you see in
this chapter and the contents of the setup screens on your
terminal. This is because of improvements made to the terminal
by the manufacturer. Follow the setup documented here as
closely as possible.
3
Change the values in each parameter field on each setup
screen as necessary, so that they match those shown in
“HP700/22 setup screens” on page A-20.
Use the following keys to view and change setup values:
Standard 1.0
Arrow keys
Move from field to field.
Return
Scroll through possible values or
cause the requested action to take
place (depends on type of field).
4
To save changes, return to the General Setup screen, move the
cursor to the Save field, and press Return.
5
To exit setup mode, press the SETUP key.
Modular Option EC Installation and Maintenance Guide
November 1999