Download Meridian M2500 Specifications

Transcript
Attendant consoles
Page 69 of 504
Procedure 12
Cross-connecting attendant consoles
1
Locate the attendant console terminations at the cross-connect terminal.
2
Connect Z-type cross-connecting wire to the leads of the attendant
console.
3
Locate the line circuit card (TN) terminations.
4
Run and connect the other end of the cross-connecting wire to the
assigned TN terminal block.
End of Procedure
Refer to Table 6 for details on Z-type cross-connecting wire and Table 7 on
page 70 for a list of inside wiring colors.
Table 6
Z-type cross-connecting wire
Size
Gauge
Color
Designation
1 pr
24
Y-BL
Tip
BL-Y
Ring
W-BL
Voice T
BL-W
Voice R
W-O
Signal T
O-W
Signal R
W-G
Power
G-W
Power
3 pr
24
Telephones and Consoles
Description, Installation, and Operation