1
Download Enterasys D-Series Specifications
Transcript
clear spantree msti clear spantree msti Use this command to delete one or more Multiple Spanning Tree instances. Syntax clear spantree msti [sid sid] Parameters sid sid (Optional) Deletes a specific multiple Spanning Tree ID. Defaults If sid is not specified, all MST instances will be cleared. Mode Switch command, read‐write. Example This example shows how to delete all MST instances: D2(su)->clear spantree msti show spantree mstmap Use this command to display the mapping of a filtering database ID (FID) to a Spanning Trees. Since VLANs are mapped to FIDs, this shows to which SID a VLAN is mapped. Syntax show spantree mstmap [fid fid] Parameters fid fid (Optional) Displays information for specific FIDs. Defaults If fid is not specified, information for all assigned FIDs will be displayed. Mode Switch command, read‐only. Example This example shows how to display SID to FID mapping information for FID 1. In this case, no new mappings have been configured: D2(su)->show spantree mstmap fid 1 FID: SID: 1 0 Enterasys D-Series CLI Reference 8-13
