Download Vodavi Infostar VX2 Programming instructions

SystemAd.min,istrato.& M:an.u.al~:
S-upp&vmt:
“”..:..i
The lNFOSTAR’“W2
is now being shipped with softwareversion 3.0. This document gives a description ofthe
new features and the changes that were made to the existing features. A new section - Section 70 - System
Administration Reports has been added to the back of this manual. The command summaries on page 5.7 and
pages 6.25 -26 have been updated to software version 3.0.
New Features
D Access Code Protection
For The System Administrator - The On Line Programming Menu is now propressing F8 for the On Line Programming Menu, the system prompts for an
tected by an access code. After
access code. See Figure 1. The
system administrator’s mailbox.
mailbox access code is 6947,
[ver 3.01
COMPANIES
[A] Setup
[D] Status
[E] Link
[F] Ext. Access
access code is the 3-character company code and the access code forthe
For example, if the company code is EXC and the system administrator’s
the access code is entered as EXC6947.
[ON LINE
PROGRAMMING MENU]
Code
[S]
[T]
[U]
[V]
[cl Type
[H] Out Dial Sched.
[I] C.C.R
IJ1 Class Of Service
[PgDn]
InfoStar
Next
Line Set Up
Bin Numbers
D.N.1.S Table
Message Info
[Esc]Quit
Vx2
12/16/91
17:23
Figure 1
0
New Sizes - The following
new configurations
of the INFOSTAWX2
are available:
o Ports - The VX2 can be ordered in the following additional port increments: 12, 16, 20, and 24.
l
Hours - The VX2 can be ordered in the following additional disk sizes: 30, 60, and 100 hours. The 30
hour disk drive can be ordered with either the INFOSTAR/AP/G or the INFOSTAR/AP/12.
the 60 and 100 hour disk drives require the use of the INFOSTAR/AP/12.
March 2, 1992
Page 1 of 4
However, both