Download Siemens HIPATH V1.2.33 Specifications

hg-07.fm
Explorers
Routing
7.4.5.4
Nur für den internen Gebrauch
Display Configured Subscribers
You can display a list of configured subscribers.
WBM path:
WBM > Explorers > Routing > (double-click) Dialing Parameters > (right-click) Configured Subscribers > Display Configured Subscribers
The Configured Subscribers mask is displayed. The station numbers and subscriber types are
listed in a table. Subscriber types are, for example, HFA system clients, H.323 clients (with IP
address) or PSTN peers.
7.4.5.5
Configured IP Addresses
These addresses are the IP addresses of, for example, the LAN interfaces, the individual subscribers or the PSTN peers.
WBM path:
WBM > Explorers > Routing > (double-click) Dialing Parameters > Configured IP Addresses
Right-click Configured IP Addresses to display a menu containing the following entries:
> Display Configured IP Addresses
7.4.5.6
Display Configured IP Addresses
You can display a list of the relevant IP addresses.
WBM path:
WBM > Explorers > Routing > (double-click) Dialing Parameters > (right-click) Configured Subscribers > Display Configured IP Addresses
The Configured IP Addresses mask is displayed. The IP addresses and subscriber types are
listed in a table. Subscriber types are, for example, LAN interfaces or PSTN peers.
The entries can be sorted. An arrow after a column name indicates the sort criterion. If you wish
to sort the table by another column, click the respective column name.
7-146
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation