1
Download Siemens HIPATH V1.2.33 Specifications
Transcript
hg-09.fm Technical Concepts Using SNMP Nur für den internen Gebrauch Type Trap Message (SW/HW) SW MSG_WEBSERVER_MAJOR_ERROR SW MSG_SSM_NUM_OF_CALL_LEGS_2BIG SW MSG_SSM_SESSION_CREATION_FAILED SW MSG_IPNCV_STARTUP_ERROR SW MSG_IPNCV_STARTUP_SHUTDOWN SW MSG_IPNCV_INTERNAL_ERROR SW MSG_IPNCV_MEMORY_ERROR SW MSG_IPNCV_SIGNALING_ERROR Table 9-26 Traps for Internal Errors (HG 1500-Specific) The weighting of the individual traps can vary depending on the severity of the event or error and is described by the following categories: ● Cleared (problem already resolved) ● Indeterminate (no classification possible) ● Critical (critical error) ● Major (major error) ● Minor (minor error) ● Warning (warning only) ● Information (for information only) General traps, such as MSG_GW_SUCCESSFULLY_STARTED, are sent as "information". Reboot traps are always "critical", "major" or "minor" errors. Threshold/resource traps occur as follows: When an event is received, the trap is sent as either "Warning", "Minor" or "Major". If the trap recurs, reminders are sent (at increasing intervals) with a weighting that is at least the same or higher than the initial trap. If the event was corrected (for example, "Link up" or sufficient RAM was provided), the trap is sent with the category "Cleared". 9-40 A31003-H3580-M103-2-76A9, 01-2009 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
