Download Incowin User Manual

Transcript
General Information about the INCOWIN Software
Dialog box topic
Description
Select a folder
A folder can be selected for saving.
Click on [OK], select any directory in the next dialog
box, enter a filename and confirm all the entries with
[Save].
[No]
The data are not saved.
There are three kinds of program presettings when saving setting files:
1. If the settings were not loaded from a saved file, the Filename box is
empty and the presetting for the memory location is active project.
2. If the settings were loaded from a saved file of the active project,
the filename of the loaded file appears in the input box and the presetting for the memory location is active project.
3. If the settings were loaded from a saved file of another, inactive
project, the complete path with the filename of the loaded file appears in the Filename box and the presetting for the memory location is Select folder.
If you still want to save the settings in the active project in this case,
you must delete the specified path in the Filename box. The system
otherwise sets both paths together which causes a corresponding error message. Click on [Save] again and correct the inputs.
Loading of setting files can be simplified by using the filename autoload for these files. System and evaluation settings with this name are
loaded automatically (with message window) in the following cases:
•
After the program start if they are in the active project
•
When setting or changing the active project when you are in the activated project
8.5.4.4
Autoload
function
Saving Printing Templates
Saving printing templates differs from saving measurements in the following points:
•
Printing templates are saved directly in the dialog box where they
were defined.
•
The active project and general templates are not used. The appropriate prompts are therefore omitted.
•
If the printing template has already been saved, this is overwritten
without another security prompt when saving with method 3.
The demo printing templates created in the software installation are
write-protected as standard and must be saved with a different filename first with the Save as command if they are to be changed.
ID 10034503
V-INCOMETER with INCOWIN
Attention!
143