Download USER MANUAL

Transcript
14
USER MANUAL
__________________________________________________________________________________________________________________
14. Basic scale functions
In further part of this manual the following graphical symbols will be used to
describe scale functions:
put load on the pan
12g
-
take load off
-
press a key when indication on
the left is displayed
-
forced change
-
automatic change
T
14.1. Simple weighing
0.00 g
T
43.04 g
If indication different from zero is
shown for empty pan, →T← key
should be used.
Weighing results should be read
when indicator is displayed.
14.2. Weighing with tare
23.13 g
0.00 g
63.24 g
T
The scale allows taring in the whole
measurement range.
A sum of tare and net mass value
can not exceed scale capacity
(Max).