Download USER MANUAL

Transcript
32
USER MANUAL
__________________________________________________________________________________________________________________
15.16. Setting backlight function (b_LIGHt)
0.00g
MENU
b_LIGHt
T
-
b_L on
T
-
The function is used for choosing the
work mode of scale display backlight:
b_L OFF – switch backlight off,
b_L on – switch backlight
permanently on,
b_L ECO – switch off after 30
seconds of inactivity (no load changes
and no key operation),
b_L bAt – like above, but when
powering from accumulators only,
out – leave without changes.
0.00g
Switching backlight off causes
decrease of energy consumption by
the scale, what is important during
powering from accumulators.
15.17. Function for choosing reading unit (rESOLUt)
0.00g
MENU
rESOLUt
T
HI rES
T
0.000g
The function allows choosing reading
unit value (resolution).
User can choose:
- HI rES – high resolution
- LO rES – low resolution