Programming You can programme certain settings on the hob to suit your personal needs. Several settings can be changed in succession. After starting the programming function, (programme) and (status) will ap‐ pear in the timer display. On hobs that have 3 cooking zones, an additional display appears at the back left. The programme is displayed in the front left and rear left cooking zone control scales. Example: Programme 3 = front left , rear left Programme 14 = front left , rear left The status is displayed in the front right control scale. After the programming function is exi‐ ted, an automatic reset is performed. It is concluded when an indicator light lights up briefly above the sensor. Do not turn the cooking zone on until the reset is concluded. 40 To access programming mode With the hob turned off, touch the and sensors at the same time until the indicator light for the safety lock flashes. To set a programme To set the unit digits, touch the re‐ quired number on the front left con‐ trol scale. To set the tens digits, touch the re‐ quired number on the rear left con‐ trol scale. To set the status Touch the required number on the front right control scale. To save the settings Touch the sensor until the indica‐ tors go out. To avoid saving the settings Touch the sensor until the indica‐ tors go out.