Download DK-114N-1 Datasheet

DK-114N series - Development Kit Manual
1. Key Features
• Drive any CBT or PT series Big Chip LED up to 14 A
• Pulse frequencies of greater than 40 kHz possible
• Analog current control via on-board potentiometer or external voltage
• Simple current and voltage measurements
• Fast rise and fall times - less than 1 microsecond
• Fast current level switching - less than 5 microseconds
2. Development Kit Contents
The DK-114N-1 and DK114N-3 are similar in all aspects; while the DK-114N-1 supports one channel, the DK-114N-3 supports three channels.
All instructions in this manual are based on the DK-114N-1 and can easily be replicated in the DK-114N-3. As shown in Figure 1, the DK114N-1 consists of :
• Heat sink and driver board
• Cable assemblies
• Thermal interface materials and mounting hardware
• User Manual
Figure 1: Contents of DK-114N-1
A list of contents of the development kit is given in Appendix A. This development kit is designed with flexible features to allow easy
evaluation of the Big Chip LEDs but is not optimized for size or for direct integration into end products. However, the underlying circuit
2
960017 Rev C
© 2013 Luminus Devices, Inc. - All Rights Reserved
Luminus Devices, Inc. • T 978.528.8000 • www.luminus.com
1100 Technology Park Drive • Billerica, MA 01821