Download D-Settlement User Manual
Transcript
General T Program Options – General Figure 3.3: Program Options window, General tab DR AF 3.2.2 Start-up with Save on Calculation Halt on Warnings Use Enter key to Deltares Click one of these toggle buttons to determine whether a project should be opened or initiated when the program is started. No project: Each time D-S ETTLEMENT is started, the buttons in the toolbar or the options in the File menu must be used to open an existing project or to start a new one. Last used project: Each time D-S ETTLEMENT is started, the last project that has been worked on is opened automatically. New project: A new project is created. The user is offered three options at the start up of D-S ETTLEMENT: New geometry, New geometry wizard and Import geometry. NOTE: The Start-up with option is ignored when D-S ETTLEMENT is started by double-clicking on an input file. The toggle buttons determine how input data is saved prior to calculation. The input data can either be saved automatically, using the same file name each time, or a file name can be specified each time the data is saved. Unmark this checkbox to prevent pausing the calculation in case of warnings. Use the toggle buttons to determine the way the Enter key is used in the program: either as an equivalent of pressing the default button (Windows-style) or to shift the focus to the next item in a window (for users accustomed to the DOS version(s) of the program). 23 of 290