Download WebGLA User`s Manual
Transcript
Figure 3.3 Advanced Herd Builder To begin, follow these instructions: 1. Click the Advanced Herd Builder button on the Herd Inventory form. 2. Select the age class from the drop down menu that you desire to work with. 3. Enter a beginning number of animals in the begin number of head box. 4. Select a basis for which the numbers you enter will be applied. If you want to enter exact numbers, select head, or if you want to use a percentage of the beginning number of head, select percentage. 5. Next enter an average AUE value and select the beginning month of the profile. 6. Fill in the appropriate numbers under each month for expected deaths and the number of culls you plan to remove. Again, these values entered here are actual animal numbers or percentages (expressed as whole numbers) depending on which method you selected. 7. If the type of animal selected is a breeding animal, you need to enter values for birth and weaning. If not, leave these rows bank, and proceed to the next step. For the birth row, enter values for births under the months for which you expect your animals to calve. For the weaning row, enter the values under the months when you plan to wean. 8. Click the calculate button. The table in the bottom half of the form will fill in with the AUE values and head values for each month for the selected animal. 33