Download AutoPRO 6 Software - PIKE Technologies
Transcript
Edge Exclusion The inner and outer edge exclusions may be set up using the two slider controls. The maximum value for these exclusions is 10 mm. IR Beam Diameter The IR beam diameter may be set to one of several values. This setting only changes the visual representation of the IR beam on the disk. It does not change the actual beam size in the accessory. The beam sizes available are 12.7 mm, 9.5 mm, 6.4 mm, 4.8 mm and 3.2 mm. Disk Diameter Five disk diameters may be programmed. This setting changes the size of the disk in the programmer only. It does not actually change the physical size of the disk. The sizes are 48 mm, 65 mm, 84 mm, 95 mm and 130 mm. PN 350-000070-02 P a g e | 47