Download AutoPRO 6 Software - PIKE Technologies

Transcript
Edge Exclusion
The inner and outer edge exclusions may be set up using the two slider controls. The maximum value for
these exclusions is 10 mm.
IR Beam Diameter
The IR beam diameter may be set to one of several values. This setting only changes the visual
representation of the IR beam on the disk. It does not change the actual beam size in the accessory.
The beam sizes available are 12.7 mm, 9.5 mm, 6.4 mm, 4.8 mm and 3.2 mm.
Disk Diameter
Five disk diameters may be programmed. This setting changes the size of the disk in the programmer
only. It does not actually change the physical size of the disk. The sizes are 48 mm, 65 mm, 84 mm,
95 mm and 130 mm.
PN 350-000070-02
P a g e | 47